
Bumper Brackets
A direct replacement for the Pocher plastic brackets. Easy to install with the 0-80 bolts provided. Cast in bronze and chrome plated. Notice the Bumper Ends, Running Lights, Head Lights, Radiator Grill, Vinyl Transfers...and, Elephant Radiator Cap! Beautiful model under construction by Frank Giordano.
Part No.B034 $32.00 per pair

Bugatti Running Lights
What respectable owner of a Bugatti Coupe would not like to have proper shaped and sized Running Lights? Once again MML brings you another must have part. Cast in bronze and chrome plated, comes with 0-80 bolts. It takes a little bit of work, but it will keep your valet busy!
Part No.B033 $25.00 per pair
Another Breakthrough from MML!
Properly sized and shaped Valve Stems
After years of frustration with the Pocher supplied Valve Stems (the one on the left!)…we now have produced our own. A direct replacement, screws into the provided threaded hole and is cast in bronze.
Part No. Z043 $10.00 set of six 
Dash Board Ensemble

This wonderful dash was made by Frank Giordano and shows our new parts; The Instrument Cluster, Gate and Levers, Light Housings and Switches. They are all cast in bronze and plated. Requires some modification to the Pocher dash…or, why not build your own out of cherry wood? The Instrument Cluster will require using our Gauge Faces, Lenses and Bezels (B011). The Light Housings are hollow to accommodate the bulb and slotted for the light. Ensemble is sold as a set or as individual parts.
Part No. B006 $65.00 8 piece set

Gate and Levers
Part No.B029 $25.00 per set

Switches

Part No.B028 $15.00 per pair

Light Housings

Part No.B023 $20.00 per pair

Instrument Cluster

Part No.B019 $15.00 each

Bumper Ends

One of the many new Bugatti Parts we have developed for both our last model and for the next. The Bumper Ends are properly shaped, direct replacements for the plastic, chrome coated Pocher parts. They are cast in bronze with a matte finish…then nickel plated to match the prototypes which were cast aluminum.

Part No.B027 $25.00 per pair

Hood Latches
These are without question our best Hood Latches. Jorge made the originals and they are a perfect match to the prototypes…and, they work! They are cast in bronze and chrome plated. The set comes with 1mm threaded rod to attach the top to the base and bezels for the hood.
Part No.B032 $25.00 per pair

Tail Lights and Plates
In our continuing quest to replace all the Pocher provided chrome plated plastic parts…here are several new parts. First, the Tail Light Housings…prototypically shaped, hollow to provide space for bulbs, cast in bronze and chrome plated. The red lenses are not provided, but, are easy to make from Pocher red sprue. Next, shown are the Country Code and License Plates. Again, cast in bronze and chrome plated (lettering not included).
Tail Light Housings - Part No.B026 $40.00 per pair
Country Code Plate - Part No.B024A $20.00 each
License Plate - Part No.B024 $20.00 each

Exterior and Interior Door Handles
We are offering these beautiful Door Handles…with a caveat! They are NOT for the beginner. They require extensive modifications to the door panels, inside and out. We will gladly help…with photos and instructions. And, we believe the effort is worth it. They are cast in bronze and chrome plated.
Exterior Door Handles - Part No.B020 $40.00 per pair
Interior Door Handles - Part No.B021 $25.00 per pair

Spare Tire Wrench

Throw away the awful Pocher part and use this dirct replacement...can you tell which is the prototype? Also, notice the Vinyl Transfers (see below). Cast in bronze and chrome plated.
Part No.B030 $15.00 each
Vinyl Transfers to Enhance the Beautiful Bugatti Wheels
The photo on the right is our model of the Suprafile under construction.
These photos show how easy the transfers are to apply. They are NOT decals…no messy water, tearing or bubbles! With fumbling fingers takes about 3 minutes to apply and we include a extra one…just in case. Available in either Black or Red.
Part No.B031r (red) $10.00 set of six
Part No.B031b (black) $10.00 set of six
Want to improve the value and enhance the appearance of your Bugatti?
Model Motorcars is always trying to find ways to improve our customers’ models. Now, we have achieved the ultimate for the Bugatti Radiator…the Art Deco Grill. The Grill is photo-etched in solid nickel, comes with the medalion in red epoxy (looks just like the enameled orginal!), is easy to install and is the only difference (other than color) between the Coupe, Surprofile and the very expensive Coupe de Ville!
Part No.B025 $25.00 each

ELEPHANTS! ELEPHANTS! ELEPHANTS!
We have commissioned a replica of the famous Bugatti Elephant mascot. This wonderfully whimsical pachyderm was Ettore Bugatti's response to the failure of his huge Type 41 Royales to attract customers. His famous sculptor brother, Rembrandt Bugatti, provided him with the design, and Ettore had it cast in sterling silver—a white elephant. Copies of this famous mascot have found their way onto bookshelves and desktops the world over.
The MMLtd 1:8 scale Prancing Elephant Mascot was sculpted by Jill A. Kenike, a former designer for Tiffany and Co. Because our Prancing Elephant Mascot is intended to adorn the radiator of Pocher Bugattis, we asked Ms. Kenike to trim the pachyderm down a bit to match the svelt lines of the zoomy Profileé and Surprofilé Bugattis. Our Prancing Elephant Mascot is balancing on top of our new Bugatti Radiator Cap which features the correct profile and simulated quick-release latch of the prototype. Now the Pocher Bugatti can have both a correct radiator cap and a link with the artistic legend that is Bugatti.
Sterling Silver Prancing Elephant Mascot - Part No. B015s $45.00 each
|