The Alfa Steering and Front Brake Assembly

Everything in the above photo (except the Pocher back plate and tie rod) is made by MML.

Under development for almost a year, the Alfa Steering and Front Brake Assembly is clearly one of our most ambitious projects ever undertaken. Each part in this Assembly started as a hand built prototype created on our workbenches. They are cast in bronze and then undergo a final preparation which includes drilling, tapping and brazing together some sub-assemblies. The Steering Arms are a direct replacement for the Pocher stamped metal pieces and attach using the Pocher bolts. The Brake Arm is tapped and attaches with the 2 mm threaded rods. And, the Brake Levers utilize the tapped 0-80 hole in the MML Axle. The 1/16" brass rod (provided in the Kit) fits snuggly in the end of our Clevises (a dab of our Bondini glue is recommended).

The Kit includes the Steering Arms, Brake Arms, Brake Levers, Clevises, 00-90, 0-80, 2 mm Bolts and brass rod.

This Kit does require using the MML Axle (Part No.A002) …the spindles need to be shortened about 1/16" of an inch from the top and bottom, easily done with a file. And, the tie rod provided by Pocher also needs to be fitted. We will fit both at no charge if they are sent to us.

Part No.A037a $140.00 for the Kit, including the Axle (Part No.A002) sized to fit